Fuel Diesel Gas Organic Heat Carrier Coil Heater Thermal Oil Boiler
For Cement Plant,Asphalt Plant
YY(Q)W series thermal oil boiler adopts horizontal chamber
combustion three-coil structure,and its body is composed of outer
coil,middle coil,inner coil and rear coil.
It is widely applied for oil chemical industry, chemical fiber
industry, wood processing industry, paper making industry, building
materials industry, food industry,etc.
This thermal oil boiler takes heat carries oil as medium and uses
the hot oil circulating pump force the medium to make liquid
circluation ,then the thermal energy will be transmitted to the
devices and back to furnace to be reheated. so the boiler can get
higher working temperature at low pressure ,and make a better usage
of heat , it is a kind of safe boiler with high efficiency and low
power consumption this series boiler have advinced program control
system, equiped with liquid level controller,pressure controller
,temperature controller ,and alarms to make sure the boiler work
orderly and safe.so it is a kind of safe boiler with high
efficiency and low power consumption .
Product: thermal oil boiler,thermal oil heater,Thermic Fluid
Heater,hot oil boiler,
Thermal capacity:350kw-1400KW, 300,000-2,000,000 Kcal/H
Working pressure:0.8-1.0 MPA
Outlet temperature:320 C
Available fuel:natural gas, coke oven gas, bio-gas,liquefied
petroleum gas, diesel, heavy oil, light oil, crude oil
Available industries:Petroleum, chemical, chemical fiber,
pharmaceutical, textile printing and dyeing, building materials,
wood processing, vegetable oil processing and other industries
|Model No.||Thermal power(kcal/h)|
|Max. working temp.(℃)||Medium circulation(M3/H)|
Feature of thermal oil boiler
1. These are the horizontal type organic heat medium heaters
circulating through mandatory liquid.
2. Its heating surface consists of the closely-arranged coils in
three sides of inner, middle part and exterior (inner and
exterior), and the large-capacity boiler is equipped with “the
ceiling coils” so as to ensure the compact structure. The inside of
the inner coils (the inside of the inner coils and central coils
among the multilayer coils) work as the radiant heating surface,
and the external surface of the inner coils (the outside of the
middle coils among the multilayer coils) and exterior coils from
the convection heating surface.
3. Fuel burns and gives out heat in the inner coils (the middle
coils among the multilayer coils); after radiant heating surface
absorbing a lot of heat, the high temperature gas enters into the
convection heating surface to transfer heat and then discharged out
of the furnace through the exhaust gas outlet.
4. With the automatic control instruments and instrumentation all
in readiness,the boiler is safe,reliable and easy operation.
Full set fuel (gas) thermal oil boiler is consist of Horizontal
boiler body, Boiler Burner (imported famous brand), Instruments,
Chimney, Circulating Pump, Oil Filling Pump,Expansion Tank, Oil
Storage Tank, Oil Gas Separator,Electric Control Cabinet (Chinese
& English Version), Economizer (Optional),etc.
The Gas/Oil Fired thermal oil boiler auxiliaries :
oil fired thermic fluid heater hot oil boiler
|main body of thermal oil boiler||1|
|Oil Circulating pump||1|
|oil filling pump||1|
|Electric control cabinet||1|
|high level oil storage tank||1|
|Low level oil storage tank||1|
|Valves and gauges||one batch for whole system|
Thermal Oil Boiler For Hot Press takes diesel, gas, town gas as
fuel. Three pass and wet back structure enhance it's thermal
efficiency and lower flue gas temperature. Thicker insulated
material layer makes radiating at minimum limit.
All boilers are assembly structure which is easy for installation
by just connecting system device by pipes. Intelligent system
control makes boiler operation easier and more simple. Controller
with imitation screen display has auto igniting, burning,
circulation pumps control, alarm, etc. functions.
Boiler Room Layout
|Application of thermal oil boiler|
|Chemical:||polymerization, condensation, distillation, concentration,
decomposition, deodorization, distillation of aliphatic acid,
|Petrochemical:||rectification, heating, thermal insulation|
|Plastic&Rubber:||hot-press, calender, extrusion, vulcanization molding, artical
|Textile staining:||heat setting, dry, curing|
|Fiber:||polymerization, fusion, mould pressing, thermosetting, extension,
|Carbon:||bitumen fusion, dripping, mixing,molding|
|Wood:||veneer, MDPE,HDPE,lamination flooring,birch hot-pressing, drying|
|Metal:||pickling, electroplate, coating, oil bath, heat-treatmen|
|Coating:||basting and drying, vehicle, plane, hot forming, hyperthermia
|Construction:||highway hitumen, dissolving, thermal insulation|
|Electric:||resin impregnation, melting&holding|
|Others:||different application of high temperature heat source below 350°C.|
What is the highest temperature that thermal oil heater could
thermal oil heater can reach as high as 330℃, and working under low
What are the heat-resistance temperature of grate and furnace?
The heat resistance temperature of grate is related to the grate
material, the highest temperature could be as high as 1100℃, and
the lower temperature could be 700℃.
The highest heat resistance temperature of furnace could be about
What is conduction oil/ hot oil / heat transfer fluid?
Conduction oil has a high boiling point, it usually used for the
industries that need the temperature of 150~350℃, to instead of
steam. The hot oil has the advantages of high transfer efficiency,
fast heat transfer, and good thermal stability.